TOUGH AND DURABLE
RESIN FLOORS

The ultimate hard wearing wet room system. Easy to install, OTL formers for Epoxy Resin are designed specifically for this floor finish.

OTL formers for Epoxy Resin incorporate the perfect gradient for water to flow efficiently towards the gully. The resin flooring acts as the complete waterproof barrier, therefore no tanking is required.

  1. Plywood former, 24mm thick at the perimeter edges. Manufactured with a built-in gradient creating the perfectly shaped wet room floor.
  2. Full waste support
  3. Square drainage system (SuperSlim or Round grate also available)
  4. Resin gully
  5. Resin floor covering

Style of Product

Our formers for resin are suitable for use with the Square Grate Tile-In, SuperSlim Tile-In or Round Grate product styles.

Suitable For

SECTORS

Suitable for all settings where hard wearing, level access accessible showers are required. Ideal for healthcare settings such as hospitals and hospices, residential developments, hotels, hostels, gyms, spas, care homes and student accommodation.

FLOOR TYPES

OTL formers for Epoxy Resin are suitable for installation onto the majority of rigid sub-floors including concrete slab, beam and block, concrete plank flooring and timber supported floors.

FLOOR FINISHES

Only for use with resin flooring.

Installation

OTL wet room floors are easy to install. We have to hand PDF instructions and help at the end of the phone from our friendly team.

Cleaning & Maintenance

It is recommended that regular routine maintenance should be carried out at least every 3 months (this may need to be done more frequently depending on usage).

OTL provide you with all the tools you need to make regular cleaning quick and easy.

Our maintenance guide can be found in our downloads section.

 

Technical Drawings & Guides

For technical drawings and guides please follow this link